Loading...

Victron Blue Smart IP22 Bluetooth Battery Charger – 12V 15A, 3 outputs

£153.00

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. This model has 3 positive outputs and a common negative output, allowing 3 independent batteries (or banks) to be charged simultaneously.

Description

Blue Smart IP22 Battery Charger – 15A, 3 outputs

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

The battery is charged, smartly… to perfect condition

The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and longer life. This model has 3 positive outputs and a common negative output, allowing 3 independent batteries (or banks) to be charged simultaneously.

Suitable for all lead-acid batteries (particularly leisure or ‘deep-cycle’ batteries) and Lithium-ion batteries used in caravans, motorhomes, campervans, cars, boats, off-road, industrial and commercial vehicles

Recovery of deeply-discharged ‘dead’ batteries

Unlike other brands, the Blue Smart IP22 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.

Check the status of your battery remotely

The Blue Smart IP22 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.

Features

Bluetooth Smart

The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.

High efficiency

With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.

Storage Mode: less maintenance and ageing when the battery is not in use

The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.

Also charges Li-ion (LiFePO4) batteries

LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.

NIGHT and LOW setting

When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.

Protected against overheating

Output current will reduce as the temperature increases up to 50°C, but the Blue Smart Charger will not fail.

Specifications

  • Input voltage rating: 180 – 265V AC
  • Output voltage (Absorption/Float/Storage): 14.2-14.7/13.5-13.8/13.2-13.5 VDC
  • Max. charge current: 15A
  • NIGHT or LOW charge current: 7.5A
  • No. charging stages: 6 (adaptive)
  • No. outputs: 3 (Common negative)
  • Minimum battery capacity: 75Ah
  • ‘No load’ power consumption: 0.5W
  • Operating temperature: -20ºC to +50ºC (full rated output up to +30ºC, then output reduces)
  • Cooling method: Fan-assisted
  • Mains connection: BS1363 UK 3-pin plug on 1.5m cable
  • Battery connection: Screw clamp terminals for max. 13mm2 cable (note: output cables and connections not included)
  • Ingress Protection rating: IP22
  • Body material: Aluminium (blue RAL5012)
  • Mounting holes: (download Enclosure dimensions below for full details)
  • Weight: 1.3kg
  • Overall dimensions: 235 (L) x 108 (W) x 65 (H) mm
Download Product Datasheet

Additional information

Weight 1.3 kg
Dimensions 235 × 108 × 65 mm

You may also like…